MIMAKI CF2 Series, Operation Manual

Page: 59 / 186

— 2.11 —
• By aliging the mdia edge to the
media guide, work can be set
straight. Be sure to set the work
within the Maximum effective
cutting area
• When EXPAND is set to ON
with a sensor model or No sen-
sor model, work guide may in-
terrupt the maximum cutting
area. Remove either work
guide plate, or work guide pin.
2
Press the
VACUUM
key.
The VACUUM lamp lights up (in green).
The vacuuming unit actuates to pick the
work by suction.
Fixing heavy-weight packing etc.
A work such as a heavy-weight packing or industrial rubber may not be sufficiently secured by
vacuum-suction. In this case, secure the work with adhesive tape.
• Use such adhesive tape that adhesive glue or tape will not remain on the cut-
ting panel.
Fix four sides of the work with adhesive tape.
Work Guide