MIMAKI CF2 Series, Operation Manual

Page: 6 / 186

— iv —
Corrugated board is cut out at flutes though creasing is performed [CONDI-
TION] > [PRESS (Y)] .................................................................................. 3.4
Register Mark not detected [TOOL Adjust] > [LIGHT POINTER] ............ 3.5
Tools are not aligned to each other [TOOL SELECT] .................................... 3.7
Flowchart of checking and adjusting procedures .......................................... 3.7
General explanation of the adjustment of tools ............................................ 3.8
Adjustment of the cutter ................................................................................ 3.8
Adjustment of the roller .............................................................................. 3.12
How to adjust the tools ................................................................................ 3.16
If there is a sign of failure ............................................................................. 3.19
The device not at all actuates even when the power to the device is turned on ..... 3.19
The device fails to actuate even when data is transmitted from CAD ........ 3.19
Error arises when transmitting data ............................................................. 3.19
There is no reciprocal vibration .................................................................. 3.20
The tool drags on the sheet of paper ........................................................... 3.20
Dotted lines or blurred lines are plotted ...................................................... 3.20
Troubles for which error messages are given on the LCD ...................... 3.21
Errors that can be corrected by users .......................................................... 3.21
Errors that cannot be corrected by users ..................................................... 3.23
CHAPTER 4 APPLICATION FUNCTIONS ..................... 4.1
Assignment of pen numbers [MODE SET] > [PEN ASIGN] ....................... 4.2
Setting the number cut function [MODE SET] > [MULTI-PASS] .............. 4.6
Setting the ONE-stroke cutting [MODE SET] > [ONE STROKE] ............. 4.8
Setting the direction of rotation for the coordinate axis [MODE SET] >
[ROTATE] .............................................................................................................. 4.9
Setting the cutter stroke [MODE SET] > [Z STROKE] ............................ 4.10
Setting the unit to be used for indication [MODE SET] > [UNIT] ......... 4.11
Setting the DUMMY CUT operation of the SWIVEL BLADE [MODE
SET] > [DUMMY CUT] ..................................................................................... 4.12
Alignment of mechanical axes to ruled lines printed [AXIS ALIGN] ... 4.14
Expand the cutting area [EXPANDS] .............................................................. 4.16
CHAPTER 5 REGISTER MARK DETECT FUNCTION 5.1
Setting of register mark detect ............................................................................. 5.2
How to display the register mark setting on LCD ........................................ 5.2
Precautions in preparing data with register mark ............................................. 5.3
Size of the square mark ................................................................................. 5.3
Size of the register mark ................................................................................ 5.4
The area where register marks and designs can be arranged ........................ 5.5
No-plotting area around the register marks ................................................... 5.6
The size of, and the distance between, register marks .................................. 5.9
Color of Register mark ................................................................................ 5.10
Register mark Blurred ................................................................................. 5.10