Miele G 6990 Operating Instructions Manual Download Page 87

Page: 87 / 104

Water connection

The Miele Waterproof system

As long as your dishwasher has been

installed correctly, the Miele waterproof

anti-leak system will protect you from

water damage.

Connection to the water sup‐

ply



Water in the dishwasher must

not be used as drinking water.



IMPORTANT Australia and New

Zealand

This appliance must be installed ac‐

cording to AS/NZS 3500.1. Back

flow prevention is already integrated

in the appliance.

– The dishwasher may be connected to

a cold or hot water supply, max.

60 °C.

We would only recommend connec‐

tion to a hot water supply if it is eco‐

nomical, e.g. a solar powered supply.

When connected to a hot water sup‐

ply, all programme stages which

would otherwise be carried out with

cold water will be carried out with hot

water.

– The

SolarSave

programme (if availa‐

ble) requires a hot water supply of

between 45°C (minimum) and 60°C

(maximum).

The higher the water intake tempera‐

ture, the better the cleaning and dry‐

ing results.

Summary of Contents for G 6990









































































































Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands

Miele G 6990, Operating Instructions Manual

Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands