Miele G 6990 Operating Instructions Manual Download Page 92

Page: 92 / 104

Settings menu

Language



The display can be set to appear in one

of several different languages.
You can change the language in the

display via the

Language 

sub-menu.



Select the language you want and

confirm this with

Some languages also have a country

option to select.



If so, select the appropriate country

and confirm your selection with

The flag after the word

Language 

acts as a guide if a language which

you do not understand has already

been set.

If this is the case, keep selecting the

option which has a flag after it until

you reach the

Language 

sub-menu.

Time of day

The current time of day must be set be‐

fore you can use the

Delay start

option.

Setting the clock format

You can select either a 24-hour or 12-

hour clock.



Select the

Clock format

option.



Select the setting you want and con‐

firm with

Setting the time of day



Select the

Set

option.



Set the hour with the



arrow sen‐

sors and confirm with

Then set the minutes and confirm

with

The time of day has now been saved.

Summary of Contents for G 6990









































































































Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands

Miele G 6990, Operating Instructions Manual

Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands