Miele G 6990 Operating Instructions Manual Download Page 55

Page: 55 / 104

Programme options

Extras

You can select Extras for the pro‐

gramme you have selected.



Open the door.



Switch the dishwasher on using the



sensor.



Select a programme.



Select the

Extras

option.

All available Extras will be shown in the

display.



Select the Extras you want using the

sensor.

A tick



will appear beside the Extra to

show that it has been selected.
Extras that cannot be combined will

have a lock symbol



next to them.



To deselect an option you have chos‐

en, simply press the

sensor

again.



When you have finished selecting Ex‐

tras, confirm with

The display will change back to the pro‐

gramme menu.

The number of Extras selected, e.g. 1 of

4, will appear in the programme menu.
You can save the selected Extras for

the respective programme (see "Set‐

tings menu - Save Extras").

Short

The

Short

Extra reduces the duration of

the programmes in which this option is

available by up to 30%.

The selection of the

Short

Extra may

have precedence over other selected

Extras.
In order to achieve optimum cleaning

results, energy consumption may in‐

crease slightly with this option.
When used in combination with the

Quick wash programme, the

Short

Extra

results in a wash programme without

drying or automatic opening of the door

(if available).

Energy save

The

Energy save

Extra reduces the ener‐

gy consumption of programmes in

which this option is available by up to

20%.
In order to achieve optimum cleaning

results, the programme duration is ex‐

tended with this option.

Intensive lower basket

The

Intensive lower basket

Extra intensi‐

fies cleaning performance in the lower

basket in programmes in which this op‐

tion is available.
Energy and water consumption are in‐

creased slightly due to the extended

wash duration in the lower basket.

Summary of Contents for G 6990









































































































Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands

Miele G 6990, Operating Instructions Manual

Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands