Miele G 6990 Operating Instructions Manual Download Page 59

Page: 59 / 104

Programme options

EcoStart

The

EcoStart

function allows you to take

advantage of time variable economy

rates of electricity. Before you can use

this option, you must set up to three

electricity tariff time zones (see "Set‐

tings menu - EcoStart").

You then set the latest time at which the

programme selected should end.

The dishwasher will start automatically

in the cheapest tariff zone within the

time set.



Use the



arrow sensors to set the

hour and confirm with

The hour will be saved and the minute

number block will be highlighted.



Use the



arrow sensors to set the

minutes and confirm with

The display will change to show the

programme menu.



Close the door.

The left-hand TimeControl in-operation

indicator light will start flashing.
The estimated start time for the pro‐

gramme selected will appear in the dis‐

play.
The selected programme will start auto‐

matically during the most cost effective

time zone. It will finish at the latest by

the set finish time.

Changing or deleting set times

You can change the set times or the

programme before the start time in the

display is reached.



Open the door.



Select the

Change

option and confirm

with



Press the



sensor.



Select the function for which you

want to change or delete the time.

After confirming the

Change

option, you

can change the set time.
After confirming the

Delete

option, the

set time will be deleted and the



indi‐

cator light will go out.
You can now select and start a pro‐

gramme.

Summary of Contents for G 6990









































































































Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands

Miele G 6990, Operating Instructions Manual

Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands