Miele G 6990 Operating Instructions Manual Download Page 91

Page: 91 / 104

Settings menu

Settings menu for changing

standard settings
Opening the Settings menu



Switch the dishwasher on with the



sensor if it is switched off.

The main menu will appear in the dis‐

play.

If the Memory function is activated, the

programme menu for the programme

last selected will be displayed instead

(see "Settings - Memory"). If this is the

case, use the



sensor to get to the

main menu.

To learn about the display, read the

section with the same name.



Select the

Settings 

option.

The display will change to show the

Settings 

menu.



Select the option you want to

change.

Press the



sensor to call up more in‐

formation about the programme cur‐

rently selected.

Sub-menu options which have already

been selected will have a tick



be‐

side them.



To exit a sub-menu again, use the



sensor.

The display will revert to the menu

above.

Summary of Contents for G 6990









































































































Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands

Miele G 6990, Operating Instructions Manual

Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands