Miele G 6990 Operating Instructions Manual Download Page 97

Page: 97 / 104

Settings menu

Change main menu

You can change the order of the pro‐

grammes in the programme selection

menu and also enter your favourite pro‐

grammes into the first two programme

places.



Select the programmes you want to

place in the first and second position

of the programme selection menu.



Confirm each position with

The programmes you have selected will

then appear together in the display.



If you are happy with the order in

which they are shown, confirm with



To change the order in which they are

shown, select

Change main menu

Enter the settings again.

Save extras

Additional programme options can be

added to some programmes, e.g.

Short

(see "Programme options - Extras").
You can use the

Save extras

option to

save settings you have chosen for a

particular programme so that they are

automatically selected when you run

the programme in the future.
The dishwasher is delivered with this

function deactivated.



Select the setting you want and con‐

firm with

Temperature

The temperature can be displayed in

°C/Celsius or °F/Fahrenheit.
The factory default setting is °C.



Select the option you want and con‐

firm with

Brightness

There are seven different display bright‐

ness settings.



Select the brightness you want and

confirm this with

Summary of Contents for G 6990









































































































Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands

Miele G 6990, Operating Instructions Manual

Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands