Miele G 6990 Operating Instructions Manual Download Page 6

Page: 6 / 104

Guide to the appliance

Control panel

On/Off sensor



For switching the dishwasher on and

off.

TimeControl in-operation indicator

lights

For displaying the programme time

remaining with the door shut.

Information sensor



For displaying additional information

about the option in the display.

Arrow sensors



For altering values shown in the dis‐

play.

For navigating between different me‐

nus.

Back sensor



For navigating back to the previous

menu or deleting values which have

been set previously.

sensor

For selecting the option shown in the

display.

For confirming messages.

Display

See next page for more information.

Delay start sensor



with indica‐

tor light

For selecting the "Delay start" func‐

tion.

These operating instructions apply to several different dishwasher models with

different heights.

The specific dishwasher models are referred to as follows:

Standard = 80.5 cm high dishwashers (integrated)

and 84.5 cm high dishwashers (freestanding)

XXL = 84.5 cm high dishwashers (integrated)

Summary of Contents for G 6990









































































































Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands

Miele G 6990, Operating Instructions Manual

Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands