Miele G 6990 Operating Instructions Manual Download Page 64

Page: 64 / 104

Programme chart

Further programmes

SolarSave

This programme does not heat the wa‐

ter. To use it, the water intake tempera‐

ture must be at least 45°C (see "Water

connection - Connection to the water

supply"). This programme is suitable for

mixed loads of crockery and glassware

with moderate, slightly dried on food

residues.

Pasta/Paella

Programme with long soak phases in‐

corporated for mixed loads of crockery,

pots and pans and robust porcelain.

This programme is particularly suitable

for removing soiling containing starch

left by pasta, rice and potatoes.

Tall items 65°C

Programme for very large heat-resistant

items, (e.g. very deep pans). In this pro‐

gramme the upper basket needs to be

removed to make space for large items

in the lower basket. This programme

has a medium action to remove fresh to

slightly dried on residues.

Glasses warm

This programme does not use rinse aid

and omits the drying phase. It is partic‐

ularly suitable for cleaning beer glasses

where a good head of froth is needed.

Maintenance programme

The wash cabinet is largely self-clean‐

ing. However, if residues or soiling build

up in the cabinet, they can be removed

by running the "Maintenance pro‐

gramme" without a load. This pro‐

gramme is designed for cleaning the

wash cabinet using care products such

as Miele's dishwasher cleaner or condi‐

tioner (see "Optional accessories -

Dishwasher care products). Please fol‐

low usage instructions on the packag‐

ing.

Summary of Contents for G 6990









































































































Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands

Miele G 6990, Operating Instructions Manual

Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands