Miele G 6990 Operating Instructions Manual Download Page 89

Page: 89 / 104

Water connection

Drainage

– The appliance drainage system is fit‐

ted with a non-return valve which

prevents dirty water from flowing

back into the dishwasher via the

drain hose.

– The dishwasher is supplied with ap‐

prox. 1.5 m of flexible drain hose with

an internal diameter of 22 mm.

– The drain hose can be extended us‐

ing a connection piece to attach a

further length of hose. The drainage

length must not be longer than 4 m,

and the delivery head must not ex‐

ceed 1 m.

– If the hose is to be directly fitted to

the drainage outlet on site, use the

hose clip supplied (see installation di‐

agram).

– The hose can be directed to the left

or the right of the appliance.

– The on-site connector for the drain

hose can be adapted to different

widths of hose. If the connector pro‐

trudes too far into the drain hose, it

will need to be shortened. Otherwise

the drain hose may become blocked.

– The drain hose must not be short‐

ened.



Make sure that there are no

kinks in the hose, and that it is not

squashed or stretched.

After commissioning the appliance,

ensure that the water outlet does not

leak.

Venting the drainage system

If the on-site drain connection is situ‐

ated lower than the guide path for the

bottom basket rollers in the open door,

the drainage system must be vented.

Otherwise a siphoning effect during a

programme can cause the appliance to

empty itself of water.



To vent it: Open the dishwasher door

fully.



Pull the lower spray arm firmly up‐

wards to remove it.



Cut off the top of the vent valve in the

wash cabinet.

Summary of Contents for G 6990









































































































Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands

Miele G 6990, Operating Instructions Manual

Search results

Summary of Contents for G 6990

Reviews:

Related manuals for G 6990

Brands by name

Popular brands