Miele DA 420V-6, Operating Instructions Manual

Page: 434 / 448

Activating Con@ctivity 2.0
54
Activating the cooktop
 While the rangehood is searching for
the radio connection, start activating
the cooktop.
More information about this can be
found in the Operating instructions
for the cooktop.
 When the cooktop registers that
connection has been established,
confirm activation on the rangehood
with the run-on option control
5  15 .
All indicators will go out.

Confirm the activation on the
cooktop.
The Con@ctivity 2.0 function can now
be used.
If you do not confirm your selection
within 4 minutes, activation will not take
place.
You only need to carry out the
activation procedure once. If the
appliances are disconnected from the
electricity supply, during a power cut
for example, they will still remain
activated.
Activation failed
 If connection cannot be established
despite activating the Con@ctivity
function on the rangehood and
cooktop, the function must be
deactivated on both appliances and
then the procedure repeated.
Deactivating Con@ctivity 2.0

Deactivation on the rangehood is
carried out in the same way as
activation, by selecting the "
 "
control instead of "

".
 To deactivate the cooktop, please
refer to the Operating instructions
supplied with it.
Please bear in mind that disabling the
signal will also disable any remote
control function and this will have to
be activated again.