manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 134 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 134

Warning and Safety instructions

6

Safety with children

 

Young children must not be allowed to use this appliance.

 

Older children may only use the appliance if its operation has

been clearly explained to them and they are able to use it safely.
They must be aware of the potential dangers caused by incorrect
operation.

 

Cleaning may only be carried out by older children under the

supervision of an adult.

 

Please supervise children in the vicinity of the cooktop and do not

let them play with it.

 

The cooktop gets hot when in use and remains hot for a while

after being switched off. Keep children well away from the cooktop
until it has cooled down and there is no danger of burning.

 

Danger of burning! Do not store anything which might arouse a

child's interest in storage areas above or behind the cooktop.
Otherwise children could be tempted to climb onto the cooktop with
the risk of burning themselves.

 

Danger of burning and scalding! Turn the handles of pots and

pans on the cooktop to the side or the rear so that children cannot
pull them down and burn themselves.

 

Danger of suffocation! Whilst playing, children may become

entangled in packaging material (such as plastic wrapping) or pull it
over their head with the risk of suffocation. Keep packaging material
away from children.

 

Activate the system lock to ensure that children cannot switch on

the cooktop inadvertently. Use the safety lock when the cooktop is in
use to prevent children from altering the settings selected.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments