Miele DA 420V-6 Operating Instructions Manual Download Page 101

Page: 101 / 448

Cleaning and care

Removing the upper spray arm



Push the upper spray arm upwards



to engage the inner ratchet. Then
unscrew the spray arm by rotating the
screw thread anti-clockwise (when
viewed from below)



Removing the middle spray arm



Rotate the screw thread of the middle
spray arm clockwise (overhead
perspective)



(see diagram) and

remove the spray arm



Removing the lower spray arm



Remove the lower basket.



Rotate the screw thread of the lower
spray arm anti-clockwise



and pull

the spray arm upwards to remove



Cleaning the spray arms



Use a pointed object to push food
particles stuck in the jets into the
spray arm.



Rinse the spray arm thoroughly under
running water.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Search results

Summary of Contents for DA 420V-6

Reviews:

Miele DA 420V-6, Operating Instructions Manual, Page: 101 / 448

Search results

Summary of Contents for DA 420V-6

Reviews: