Miele DA 420V-6, Operating Instructions Manual, Page: 172 / 448

Safety features
44
Overheating protection
All the induction coils and cooling
elements for the electronics are fitted
with an overheating protection
mechanism. Before the induction coils
and/or cooling elements get too hot, the
overheating protection activates in one
of the following ways:
Induction coils
- Any Booster function in operation will
be switched off.
- The set power level is reduced.
- The cooking zone switches off
automatically.  will flash alternately
with  in the timer display.
You can use the cooking zone again as
usual when the fault message has gone
out.
Cooling elements
- Any Booster function in operation will
be switched off.
- The set power level is reduced.
- The cooking zones switch off
automatically.
The affected cooking zones can only be
used again as usual once the cooling
element has cooled down to a safe
level.
The overheating protection may be
triggered under the following
circumstances:
- The pot or pan being used is empty.
- Fat or oil being heated on a high
power level.
- Insufficient ventilation to the
underside of the cooktop.
- A hot cooking zone being switched
on after an interruption to the power
supply.
If, despite removing the cause, the
overheating protection mechanism
triggers again, contact Miele.