Miele DA 420V-6 Page 240 Operating Instructions Manual Download

Page: 240 / 448

Settings

Software version

The software version menu option is for
use by Miele service technicians. You
do not need this information for
domestic use.

Showroom programme

This function enables the microwave
oven to be demonstrated in showrooms
without heating up. Do not activate this
setting for domestic use.

Demo mode

If you switch the microwave oven on
while demo mode is activated, the
message

Demo mode

will appear in the

display. The appliance does not heat
up.

–

Touch

for at least 4 seconds to

activate demo mode.

–

Off

Touch

for at least 4 seconds to

deactivate demo mode.

The microwave oven is fully
functional again.

Factory default

One setting can be used to reset all the
changes made to the initial state of the
microwave oven.

–

Do not reset

All changes made are retained.

–

Reset

All settings are reset to the factory
default settings.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Search results

Summary of Contents for DA 420V-6

Reviews:

Related manuals for DA 420V-6

Brands by name

Popular brands

Miele DA 420V-6, Operating Instructions Manual

Search results

Summary of Contents for DA 420V-6

Reviews:

Related manuals for DA 420V-6

Brands by name

Popular brands