manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 205 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 205

Warning and Safety instructions

9

 

If the appliance is installed behind a kitchen furniture door, it may

only be used with the furniture door open. Do not close the furniture
door while the appliance is in use. Heat and moisture can build up
behind the closed furniture door. This can result in damage to the
appliance and furniture unit. Leave the furniture door open until the
appliance has cooled down completely.

 

The appliance must not be used in a non-stationary location (e.g.

on a ship).

 

Reliable and safe operation of this microwave oven can only be

assured if it has been connected to the mains electricity supply.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments