manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 192 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 192

Installation

*INSTALLATION*

64

Electrical connection

Risk of damage from incorrect

connection.
Incorrect installation, maintenance
and repairs can be dangerous to
users.
Miele cannot be held liable for
damage or injury caused by incorrect
or unauthorised installation,
maintenance or repair work, or by an
inadequate or faulty on-site earthing
system (e.g. electric shock).
All electrical work must be carried
out by a suitably qualified and
competent electrician, in strict
accordance with current national and
local safety regulations, and any
additional regulations of the local
electricity provider.
After installation, ensure that all
electrical components are shielded
and cannot be accessed by users.

Total power output

See data plate.

Connection data

The connection data is quoted on the
data plate. Please ensure this
information matches the household
mains supply.

Please see the wiring diagrams for
connection.

Residual current device

For extra safety, it is advisable to
protect the appliance with a suitable
residual current device (RCD) with a trip
range of 30 mA.

Disconnecting devices

Connection must be made via a
suitable isolator switch which provides
disconnection on all poles and which
complies with national and local safety
regulations. When switched off there
must be an all-pole contact gap of at
least 3 mm in the isolator switch. The
isolator switch must be easily
accessible after the appliance has been
built in.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments