Miele DA 420V-6 Operating Instructions Manual Download Page 35 | Manualshive

Page: 35 / 448

Miele DA 420V-6 Operating Instructions Manual Download Page 35

Warning and Safety instructions

7

Correct application



This appliance is designed for domestic use and for use in similar

environments by guests in hotel or motel rooms, bed & breakfasts,
and other typical living quarters. This does not include common/
shared facilities or commercial facilities within hotels, motels or bed
& breakfasts.



This dishwasher is not suitable for outdoor use.



The dishwasher is intended for use at altitudes of up to 4,000 m

above sea level.



The dishwasher must only be used for cleaning domestic crockery

and cutlery. Any other use is not permitted.



This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning its use by a person responsible
for their safety, and are able to recognise the dangers of misuse.

«
...
33
34
35
36
37
...
»

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments