manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 124 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 124

Installation

*INSTALLATION*

96

Venting the water drainage

If the on-site drainage connection is
situated lower than the guide for the
rollers of the lower basket in the door,
the drainage system must be vented.
Otherwise, a siphoning effect during a
programme can cause the appliance to
empty itself of water.

Open the dishwasher door fully.

Remove the lower basket.

Insert a screwdriver into the middle
opening of the vent valve in the left
wash cabinet wall 

.

Press the screwdriver further into the
opening and push it through the
membrane 

 behind.

The vent opening for the water drain is
now open.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments