manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 211 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 211

Warning and Safety instructions

15

The following applies for stainless steel surfaces:

 

The coated stainless steel surface can be damaged by adhesives

and will lose its dirt-repelling properties. Do not use sticky notes,
adhesive tape or other types of adhesive on the stainless steel
surface.

 

The surface is susceptible to scratching. Even magnets can cause

scratches.

Accessories

 

Only use original Miele accessories. If other parts are used,

warranty, performance and product liability claims will be invalidated.

 

The rack and gourmet plate supplied are designed for use with

microwave power and can be used for grilling with or without the
microwave function. 
They must not, however, be used at the same time, as this would
damage the gourmet plate. Always place the gourmet plate directly
on the turntable.

 

The gourmet plate gets extremely hot when in use. Always use

oven gloves when handling it to avoid burns. Place it on a suitable
heat-resistant mat or pot rest. 
The rack and the gourmet plate get hot during grilling (with or
without the microwave function). 
Danger of burning!
Do not place the hot gourmet plate (or any other hot cooking
container) on a cold surface, such as a tiled or granite benchtop. The
glass tray or container could crack or shatter. Use a suitable heat-
resistant mat or pot rest.

 

Do not use the gourmet plate together with a commercially

available microwave cover because the cover would become too
hot.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments