manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 249 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 249

Operation - Grilling

53

The cooking programme starts. 
A signal tone will sound when the
cooking programme is finished.

To change a cooking duration

The duration can be changed during
operation.

Touch an arrow sensor.

The programme is interrupted.

Change the time using the arrow
sensors.

Continue the programme by touching
the 

 sensor.

Selecting a start time or end time

The cooking time can be set to start at
a certain time and will end after the
preset duration.

Select the combination function you
want to use.

The corresponding sensor on the
control panel will light up orange.

Duration

 and 00:00 

min

 appear in the

display.

Use the arrow sensors to set the
cooking duration you want and
confirm your selection with 

OK

.

Then touch the 

 sensor.

Duration

 and the set duration for the

grilling programme are shown in the
display.

Choose between the options 

Start at

and 

Finish at

 using the arrow sensors.

With 

Start at

, you specify when you

want a programme to start. 
With 

Finish at

, you specify when you

want a programme to end.

Alternatively, you can also select 

Min.

minder

 at this point if you want to start

a minute minder for a separate
process in addition to the cooking
programme.

Confirm your selection with 

OK

.

Start at

 or 

Finish at

 appears in the

display, depending on which option you
have selected. 
The time is also highlighted.

Use the arrow sensors to select the
start or end time you want and
confirm by touching 

OK

.

Start at

 appears in the display and the

sensor for the selected function lights
up.

The cooking programme starts at the
preset time.

A signal tone will sound when the
cooking programme is finished.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments