Miele DA 420V-6 Operating Instructions Manual Download Page 50

Page: 50 / 448

Using for the first time

Closing the door



Push the baskets right in.



Raise the door upwards until the
catch engages.



Risk of crushing due to the door

closing.
When closing the door, you are at
risk of shutting your fingers in it.
Do not put your hand inside the door
as it is closing.

Activating the safety lock

Use the safety lock to prevent children
opening the dishwasher door. The door
can then only be opened by using a lot
of force.



To lock the door, push the slide
underneath the door grip to the right.



To unlock the door, push the slide to
the left.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Search results

Summary of Contents for DA 420V-6

Reviews:

Miele DA 420V-6, Operating Instructions Manual, Page: 50 / 448

Search results

Summary of Contents for DA 420V-6

Reviews: