manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 203 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 203

Warning and Safety instructions

7

 

Danger of burning! Children's skin is far more sensitive to high

temperatures than that of adults. When grilling with or without the
microwave function, the oven interior, the grill element and the door
will get hot. Do not let children touch the microwave oven when it is
in operation.

 

Danger of injury! The oven door can support a maximum weight of

8 kg. Children could injure themselves on an open door. Do not let
children sit on the door, lean against it or swing on it.

Technical safety

 

A damaged appliance could be dangerous. Check the appliance

for visible signs of damage. Do not use the appliance if it is
damaged.

 

If the electrical connection cable is damaged it must only be

replaced by a Miele authorised service technician in order to prevent
a hazard.

 

Operating a damaged appliance can result in microwave leakage

and present a hazard to the user. Do not use the appliance if 
– the appliance door is warped. 
- the door hinges are loose. 
– holes or cracks are visible in the casing, the door or the oven
interior walls.

 

Any contact with live connections or tampering with the electrical

or mechanical components of the microwave oven will endanger
your safety and may lead to appliance malfunctions. Do not open the
appliance housing under any circumstances.

 

Before connecting the appliance to the power supply, ensure that

the connection data on the data plate (voltage and frequency) match
the mains electricity supply. This data must correspond in order to
avoid the risk of damage to the appliance. If in doubt, consult a
qualified electrician.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments