Miele DA 420V-6 Page 405 Operating Instructions Manual Download

Page: 405 / 448

Operation (automatic and manual modes)

Adjusting the height of the
canopy

The height adjustment feature on the
canopy can be used to –

– adapt the height of the rangehood to

suit the installation conditions.

– adjust the working area underneath

the rangehood to the height of the
user.

– maximise vapour extraction by

lowering the canopy during
particularly intensive cooking.

– create more working space above the

cooktop by raising the canopy when
required.



The canopy can be raised or lowered
by pressing the



controls briefly.



Pressing one of the controls again
stops the canopy.

If it is not stopped, the canopy will
automatically be raised or lowered to its
fullest extent.

Repeated use of the height
adjustment feature over several
minutes will cause it to cut out.
It can be used again after a pause.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Search results

Summary of Contents for DA 420V-6

Reviews:

Related manuals for DA 420V-6

Brands by name

Popular brands

Miele DA 420V-6, Operating Instructions Manual

Search results

Summary of Contents for DA 420V-6

Reviews:

Related manuals for DA 420V-6

Brands by name

Popular brands