manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 177 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 177

Cleaning and care

49

Cleaning the ceramic surface

Risk of damage by pointed

objects.
The seal between the cooktop and
the worktop could be damaged.
The seal between the ceramic
surface and the frame could be
damaged.
Do not use pointed objects for
cleaning.

Do not use washing-up liquid to
clean the appliance. Using washing-
up liquid will not remove all soiling
and residues. An invisible film can
develop that can lead to
discolouration of the ceramic glass
surface. This discolouration cannot
be removed.
Clean the ceramic surface regularly
with a proprietary ceramic glass
cleaning agent.

Remove any coarse soiling with a
damp cloth and more stubborn
soiling with a glass scraper.

Then clean the ceramic glass surface
with the Miele ceramic and stainless
steel cooktop cleaner (see “Optional
accessories”) or with a proprietary
ceramic glass cleaner applied with
paper towel or a clean cloth. Do not
apply the cleaner while the cooktop is
still hot, as this can result in marking.
Please follow the cleaning agent
manufacturer's instructions.

Finally wipe the cooktop with a damp
cloth and dry it with a soft, dry cloth.

Residues can burn onto the cooktop
the next time it is used and cause
damage to the glass ceramic surface.
Ensure that all cleaner residues are
removed.

Spots

 caused by limescale, water

and aluminium residues (spots with a
metallic appearance) can be removed
using the Miele ceramic and stainless
steel cooktop cleaner.

Risk of burning due to hot

surfaces!
The cooking zones are hot during
use.
Wear oven gloves when removing
residues of sugar, plastic or
aluminium foil from a hot cooktop
with a glass scraper.

Should any 

sugar, plastic or

aluminium foil

 spill or fall onto a hot

cooking zone while it is in use, first
switch off the appliance.

Then carefully scrape off these
residues 

immediately

 whilst they are

still hot, using a shielded scraper
blade suitable for use on glass.

Afterwards, clean the ceramic surface
in its cooled state, as described
above.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments