manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 173 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 173

Programming

45

You can adapt the programming of the
cooktop to your personal needs.
Several settings can be altered in
succession.

After accessing programming mode, 

(Programme) and 

 (Code) will appear in

the timer display and 2 cooking zone
indicators will light up.

The programme is shown in the left-
hand cooking zone display, and the
code in the right-hand cooking zone
display. From programme stage 10 the
numbers appear alternately: 

 flashes

alternately with 

.

Changing the programming

Calling up programming mode

With the 

cooktop switched off

 press

both the 

 and 

 sensor controls

until 



 appears in the timer display

and 2 cooking zone indicators light
up.

Setting a programme

First touch the 

left-hand

 cooking

zone display and then touch the
relevant number on the numerical
keybank.

A dot will start to flash next to the
number.

While the dot is flashing, press the
relevant number(s) on the numerical
keybank for the programme number.

Setting the code

First touch the 

right-hand

 cooking

zone display and then touch the
relevant number on the numerical
keybank.

A dot will start to flash next to the
number.

While the dot is flashing, press the
relevant number(s) on the numerical
keybank for the code.

Saving the settings

Touch the 

 sensor until the

indicators go out.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments