manualshive.com logo in svg

Miele DA 420V-6, Operating Instructions Manual, Page: 366 / 448

Share
Download
Miele DA 420V-6 Operating Instructions Manual Download Page 366

Cleaning and care

82

Removing the shelf runners
with FlexiClip telescopic
runners

You can remove the shelf runners
together with the FlexiClip telescopic
runners (if present).

If you wish to remove the FlexiClip
telescopic runners separately
beforehand, please follow the
instructions in "Features – Fitting and
removing the FlexiClip telescopic
runners".

Danger of burning!

Make sure the oven heating
elements are switched off and the
oven interior is cool.

Pull the runners out of the holder (1)
at the front of the oven and then pull
them out of the oven (2).

Refit

 in the reverse order.

Ensure that all parts are correctly
fitted.

Summary of Contents for DA 420V-6

































































































































































































































































































































































































































































Reviews:

No comments