MICRO-EPSILON 4350006.71, Operating Instructions Manual

Page: 41 / 254

Page 41
Instruction Manual Software
thicknessCONTROL MTS 8201.LLT / 4350006.71
The LLT area contains settings for the operating mode of the sensors. For example, the
exposure time in milliseconds, the type of reflections recognized and the laser output are
created there. These values significantly influence the number of valid points and can be
changed to predefined values for the thickConSys users; these values are set using the
drop-down box labeled Material.
5.7 View
Some views can be adjusted user-specifically in the tab
View
. A red cursor marks the
position of the measurement carriage in the views of the
Cross profile
. If this is not
to be displayed, you can deactivate the button
Current width position
. Three
resp. five blue cursor lines mark the positions of the virtual 3/5 track measurement in the
view
Cross profile
. If they are to be visualized, the array
Track positions
has to
be activated.
The
Distance
and
Intensity
checkboxes in the
Show sensor raw data
group
enables to select the sensor values to be displayed in the
Sensors view, see Chap.
5.8.4
. Use the
Cross profile option
: show difference in the Views group to define
whether the difference from the target profile should be visualized in the cross profile
view. Use the two two dropdown boxes to define which measured value or which profile
should be used for the combined length trend and the pseudocolor view.
Data that belong together are divided into groups and can be expanded/compressed
individually via an arrow.