MICRO-EPSILON 4350006.71, Operating Instructions Manual

Page: 43 / 254

Page 43
Instruction Manual Software
thicknessCONTROL MTS 8201.LLT / 4350006.71
tains length, relative date [min] and the measuring value.
The file name is composed of:
FixPo Date/Time + Measurement position .txt
E.g. the file
FixPosition_20150916_153537_150mm.txt
was gathered in fix track
mode on 09/16/2015 at 3:35:37 PM at position 150 mm.
5.8.3 Views of Traversal Measurement
The single views are explained in the following paragraphs which enable measurement
data analysis of the traversal measurement. Selection of the single views is made via the
view bar.
Fig. 45 Elements of the view bar
5.8.4 Sensor View
Fig. 46 Sensor View
The actual states of both scanCONTROL sensors are shown in the initial state of the
software, see Fig. Above. Central information thereof are respectively
- the actual state of a scanner,
- the name of the scanner,
- the recorded number of scans per second,
- the number of valid points, with 640 points as maximum,
- the actual and the averaged distance value in millimeter.
By means of a bar graph that distance is represented in relation to the measuring range.
Furthermore check boxes are used to set the value visualization of each sensor which
combination from distance and intensity values
Furthermore, can be selected for the visualization of the values of each sensor on the
check boxes which combination to display of intensity values should be displayed.