MG ZS11, Owner'S Handbook Manual, Page: 71 / 324

INSTRUMENTS AND CONTROLS
Note: The electric window can be operated with the
vehicle power system in the ACC, ON and RUNNING
positions. (For safety: doors should be closed).
Rear Window Isolation Switch
Press the button (5) to isolate the rear window controls,
press again to restore control.
Note: It is recommended that you ISOLATE the rear
window switches when carrying a child.
“One-Touch” Down
The driver's window control switch (1) has 2 positions.
Short press the window control switch to the "2" position
and release. The window automatically descends to fully
open.
Window movement can be stopped at desired
position at any time by briefly operating the switch again.
“One Touch” Up with “Anti-Trap”
*
The driver's window control switch (1) has the
“one-touch” up function.
Lifting the switch to the "2"
position for a short time and releasing will automatically
close the window completely. Window movement can
be stopped at a desired position at any time by briefly
operating the switch again.
The “Anti-Trap” function is a safety feature which prevents
the window from fully closing if an obstruction is sensed -
if this happens the window will open slightly to allow the
obstruction to be removed.
Note: DO NOT operate the power window controls
continuously several times in a short time frame,
otherwise the power window controls may be disabled
to protect the motor. If this occurs, please wait a few
seconds until the motor cools down. In the case of
the driver’s window with "One Touch and Anti-Trap"
please wait 30 seconds prior to operation. In some
cases it may take 30 minutes to completely cool down,
during which time the negative battery lead should
not be disconnected.
Note: If the battery is disconnected, the “One-Touch”
and “Anti-Trap” features will be lost. To restore this
feature, fully open and then fully close the window
holding the switch for 5 seconds in the closed position.
55
1