MG ZS11, Owner'S Handbook Manual, Page: 234 / 324

STARTING & DRIVING
Lane Change Assist (LCA)
When the vehicle is driving forward, the system will
monitor the motor vehicles approaching rapidly in the
adjacent lanes. When the indicators are activated, and the
conditions for activating the lane change assist function
are met, the system will flash the warning lamp within the
respective mirror to warn the driver of an approaching
vehicle. This aims to help avoid collisions when changing
lanes.
The conditions for activating the lane change assist function
include:
1 Rear driver assistance system is in the ON state and
no faults are present in the system.
2 Lane change assist (LCA) function is enabled.
3 The vehicle speed is above 20mph (30km/h).
4 The speed of the approaching vehicle is higher than the
speed of your vehicle.
5 The approaching vehicle enters the detection area of
the LCA, the monitored areas are 7 - 70m behind your
vehicle and 4.7 m to the side of your vehicle.
6 The approaching vehicle is likely to have a collision with
your vehicle within 3.5 seconds.
218