MG ZS11, Owner'S Handbook Manual, Page: 204 / 324

STARTING & DRIVING
HDC System On/Off
When the START/STOP Switch is switched
ON/RUNNING, HDC system defaults to off. Use the
switch function within the infotainment system to turn
the HDC system on/off.
Normally, HDC system has four states:
1 Standby: Press the HDC switch (ON) to set the
system into standby mode, the green HDC warning
lamp in the instrument pack will illuminate.
2 Operation whilst in Standby mode, when the vehicle
is driven down an acute gradient, if the vehicle speed
is low, the HDC system will automatically enter
the operating state. In this case, the HDC warning
lamp in the instrument pack flashes green, this may
be accompanied by the working noise of the brake
system. The HDC system will attempt to control the
vehicle drive down the steep slope smoothly.
3 Temporary Deactivation: Press the accelerator or
brake pedal beyond a preset limit whilst in operating
mode and the HDC system will temporarily suspend
operation.
4 Off: Press the HDC switch (OFF) to switch the system
OFF, the green HDC warning lamp in the instrument
pack will extinguish.
Note: HDC system can work in both forward and
backward directions.
188