MG ZS11, Owner'S Handbook Manual, Page: 180 / 324

STARTING & DRIVING
2 Place the smart key centrally in the centre console cup
holder cubby box with the buttons facing upward - as
shown in the illustration.
3 Ensure P or N is selected, press the brake pedal and
then press START/STOP Switch to start the vehicle.
If the immobiliser cannot be released after the car has left
the area of strong radio interference or had the smart
key battery replaced please consult an MG Authorised
Repairer.
Alternative Starting Procedure （ （
（
Manual
Transmission
） ） ）
B
A
If the car is located in an area where there are strong
radio signals causing interference or the smart key battery
condition is low, please use the following steps to attempt
to start the car:
164