MG ZS11, Owner'S Handbook Manual, Page: 54 / 324

INSTRUMENTS AND CONTROLS
Side lamps and Switch Illumination
Turn the master lighting switch to position 2 to operate the
side lamps and switch illumination. With the START/STOP
Switch in the OFF position if the lighting switch is in
position 2 and the driver’s door opened an audible warning
will sound to alert the driver, the side lamps will remain
on.
Dipped Headlamps
When the START/STOP Switch is in the ON position, turn
the master lighting switch to position 3 to operate the
dipped headlamps and side lamps.
Lights Off
Turn the master lighting switch to position 4, this will
switch off all lamps, releasing the switch will allow it to
return to the AUTO switch position.
Follow Me Home
After the START/STOP Switch is turned off, pull the
lighting stalk switch towards the steering wheel.
This
will enable the Follow Me Home function, dipped beam
headlamps and side lamps will illuminate depending upon
the vehicle configuration. It can be set in the ‘Comfort and
Convenience’ in the Vehicle Settings on the entertainment
display.
Daytime Running Lamp
The daytime running lamps turn on automatically when
the START/STOP Switch is in the ON position. When
the side lamps are switched on, the daytime running lamps
extinguish automatically.
Find My Car
After the vehicle has been left in a locked condition for a
few minutes pressing the lock button again on the remote
key will enable the Find My Car function. This function
will identify the car by means of an audible and visual alert.
Pressing the Lock button on the handset again will suspend
this operation.
Pressing the Unlock button will cancel
this operation. This feature can be set via ‘Comfort and
Convenience’ in the Vehicle Settings on the entertainment
display.
38