MG ZS11, Owner'S Handbook Manual, Page: 211 / 324

STARTING & DRIVING
Electronic Parking Brake (EPB)
*
In the event of EPB malfunction where EPB
release is not possible, please consult an MG
Authorised Repairer in order to carry out an
emergency manual release of the parking
brake.
P
P
Applying the EPB
While the vehicle is stationary, the EPB can be applied.
Ensure the EPB is applied every time the vehicle is left or
parked.
• Press the brake pedal, pull the EPB switch upward until
the indicator in the EPB switch illuminates.
• If the indicator in the EPB switch and the indicator in
the instrument pack illuminates, the EPB is applied.
• If the EPB malfunction indicator lamp
P
in the
instrument pack remains on, it indicates that a fault
has been detected. Please contact an MG Authorised
Repairer immediately.
Note: An audible motor noise may be heard when
applying or releasing the EPB.
IMPORTANT
• In the event of a flat battery or power failure, it is not
possible to apply or release the EPB. In such a case,
'jump leads' shall be used for emergency engine start,
please refer to "Emergency Starting" in "Emergency
Information" chapter.
195
4