MG ZS11, Owner'S Handbook Manual, Page: 272 / 324

EMERGENCY INFORMATION
5 Remove the wiring connector. Release the lamp
assembly and remove away from the body.
6 Rotate the bulb holder in an anti-clockwise direction.
7 Remove bulb holder and remove bulb.
8 Fit new bulb to bulb holder.
9 Insert bulb holder in lamp assembly, rotate clockwise
until fully secure.
10 Ensure lamp seal is correctly located.
11 Position lamp to body, refit the wiring connector, start
both screw fixings, and tighten to 3-5 Nm.
12 Refit screw cover trim.
13 Reconnect battery negative terminal.
14 Test lamp operation.
15 Close tailgate.
256