MG ZS11, Owner'S Handbook Manual, Page: 52 / 324

INSTRUMENTS AND CONTROLS
Active Speed Limit System Warning Lamp —
Yellow
ASL
This warning lamp illuminates if an active speed
limit system failure is detected. Please contact an MG
Authorised Repairer as soon as possible.
Active Speed Limit System Indicator — Red
N N N
When the active speed limit system is armed
or active, if the target vehicle speed is currently set, this
indicator illuminates and displays the target vehicle speed
value.
When the active speed limit system is working, if the
current speed exceeds the set target speed, this indicator
will flash, and the system will immediately reduce the
speed to below the target speed. The active speed limiter
only uses engine braking to reduce speed - it is not a
substitute for physical brake application.
If the vehicle
needs to be slowed or stopped quickly the brake pedal
MUST be applied.
Particulate Filter Warning Lamp - Yellow
*
When this lamp illuminates yellow, it indicates
that the particulate filter requires regeneration. Please
drive the vehicle above 50mph until the light is no longer
illuminated, and then normal usage can be resumed.
Note: During particulate filter regeneration the
engine will run unevenly and at reduced power, this
will cease after a successful regeneration.
When this lamp flashes, it indicates that the particulate
filter is full, the engine malfunction indicator lamp
illuminates at the same time.
Please contact an MG
Authorised Repairer immediately. Please note if the
warning is ignored, the vehicle will enter a reduced
performance mode and may subsequently be immobilised.
Please refer to “Catalytic Converter and Particulate Filter”
in “Starting & Driving” section.
36