MG ZS11, Owner'S Handbook Manual, Page: 53 / 324

INSTRUMENTS AND CONTROLS
Lights and Switches
Master Lighting Switch
3
2
1
4
1 AUTO Lamp
2 Side Lamps and Switch Illumination
3 Dipped Headlamps
4 Lights OFF
AUTO Lamp
When the START/STOP Switch is in the ACC position, the
auto lighting system defaults to the ON position (1). The
auto lighting system will automatically switch the side lamps
and switch illumination on and off according to the intensity
of current ambient light.
With the START/STOP Switch switched to the ON
position, the auto lighting system defaults to the ON
position (1). The auto lighting system will automatically
switch the side lamps, switch illumination and dipped
headlamps on and off according to the intensity of current
ambient light.
Note: This function is realized by fitting a sensor
capable of monitoring exterior lighting conditions
in real time on your vehicle. The sensor is fitted in
the centre of the fascia panel near the windscreen
in some models. DO NOT mask or cover this area,
or headlamps may automatically go on when not
necessary.
37
1