MG ZS11, Owner'S Handbook Manual, Page: 57 / 324

INSTRUMENTS AND CONTROLS
Direction Indicator/Main Beam Switch
Take care not to dazzle oncoming vehicles
when driving using main beam headlamps.
1
3
4
2
Direction Indicators
Move the lever down to indicate a LEFT turn (1). Move the
lever up to indicate a RIGHT turn (2). The corresponding
GREEN indicator lamp in the instrument pack will flash
when the turning signal lamps are working.
Rotating the steering wheel will cancel the indicator
operation (small movements of the steering wheel may
not operate the self cancelling). To indicate a lane change,
move the lever briefly and release, the indicators will flash
three times and then cancel.
Headlamp High/Low Beam Switching
With the START/STOP Switch in the ON position and the
master lighting switch turned to position 3, or the auto
function has switched the lights on, push the lever (3)
towards the instrument panel to turn on headlamp high
beams. The high beam indicator lamp in instrument pack
illuminates, press the lever (3) again to switch to headlamp
low beams.
High Beam Flash
To briefly flash the high beam on and off, pull the lever
towards the steering wheel (4) and then release.
41
1