MG ZS11, Owner'S Handbook Manual, Page: 202 / 324

STARTING & DRIVING
Firm application of the brake pedal when
stopping is required by HHC to generate
sufficient brake pressure to maintain hold.
HHC assists the driver by 'holding' the vehicle during hill
starts.
The following conditions must be fulfilled to activate HHC:
• The driver's door is closed and the driver seat belt is
fastened.
• The vehicle is stopped on a slope for more than 2
seconds.
• SCS is active and fault free.
• EPB is released and fault free.
• Clutch pedal is pressed (MT), or in D/R gear (AT).
• START/STOP Switch is switched ON/RUNNING.
• Sufficient brake pedal application force has been applied.
If the driver releases the brake pedal on a hill, HHC will
maintain brake pressure for 1 - 2 seconds, after this period
the vehicle may roll backwards.
Note: HHC cannot overcome physical limitations. DO
NOT solely rely on HHC.
Note: HHC is available in both forward and backward
directions when pulling away on uphill slopes.
186