MG ZS11, Owner'S Handbook Manual, Page: 280 / 324

MAINTENANCE
Bonnet
Opening the Bonnet
DO NOT drive when the bonnet is not closed
or retained only by the safety catch.
A
B
1 From the inside of the vehicle, pull the bonnet release
handle (Figure A).
2 Move the safety catch release handle on the bonnet
lock assembly in the direction of the arrow (Figure B)
to release the bonnet safety catch.
3 Raise the bonnet and hold it up with the support rod
firmly.
Closing the Bonnet
Support the bonnet by one hand, release the support rod
using the other hand, and place it firmly into the support
rod base. Then hold the bonnet using both hands and
lower it, allowing it to drop for the last 20 cm
～ 30 cm
to fully close the bonnet.
By attempting to lift the front edge of the bonnet, check if
the lock is fully engaged after closing the bonnet. If it is not
fully engaged, you must repeat the operation.
Bonnet Open Warning
If the bonnet is not fully engaged, when the vehicle
power system is in the ON/RUNNING position, the
264