MG ZS11, Owner'S Handbook Manual, Page: 49 / 324

INSTRUMENTS AND CONTROLS
Stability Control/Traction Control System
Warning Lamp - Yellow
If this lamp illuminates, it indicates that the
stability control/traction control system has a failure.
Please contact an MG Authorised Repairer immediately.
If this lamp flashes during driving, it indicates the system is
operating to assist the driver.
Stability Control/Traction Control System Off
Warning Lamp - Yellow
O F F This lamp will illuminate if the dynamic stability
control/ traction control system is manually switched off.
ABS Malfunction Warning Lamp - Yellow
A B S
This lamp illuminates to indicate an ABS fault.
If an ABS failure occurs while driving, ABS will function
abnormally, but normal braking will still be available. Please
contact an MG Authorised Repairer as soon as possible.
Brake System Malfunction Indicator Lamp - Red
If this lamp illuminates, it indicates a failure with
the braking system such as brake fluid loss or electronic
brake force distribution failure. Please stop the car as
soon as safety permits, switch the engine OFF and check
brake fluid level (refer to "Brake Fluid Check and Top Up"
under the "Maintenance" section). If the brake fluid level
appears satisfactory contact an MG Authorised Repairer at
the earliest opportunity.
For manual parking brake, the lamp illuminates when
the parking brake is applied and extinguishes when it is
fully released. If the parking brake is not released, when
the vehicle speed exceeds 3 mph (5 km/h), this warning
lamp will flash. If the lamp remains on after the parking
brake has been released, it indicates that there is a failure
in the braking system. Please stop the car as soon as
safety permits, switch the engine OFF and contact an MG
Authorised Repairer immediately.
33
1