MG ZS11, Owner'S Handbook Manual, Page: 221 / 324

STARTING & DRIVING
The target speed of the cruise system will be set at the
current speed, and the cruise system will take effect. At
this time, the cruise control system will maintain the set
speed without pressing the accelerator pedal.
Note: The set speed held in the cruise control memory
will be cancelled when either the cruise control lever
is switched to "ASL Standby" position (figure 7) or the
START/STOP Switch turned off.
Target Cruise Speed Adjustment
When the cruise control is active, the 'target speed' can be
increased or decreased:
Push the lever switch upwards (1 in figure), this will
increase the speed.
Push the lever switch downwards (2 in figure), this will
decrease the speed.
Release the lever switch when the desired speed is reached.
Push the lever switch upwards or downwards briefly to
increase/decrease the vehicle target speed in increments of
1 mph(1 km/h), then the vehicle will accelerate/decelerate
to the new target speed.
Pressing the accelerator at any time will override the cruise
control and allow acceleration to undertake manoeuvres
such as overtaking. Releasing the accelerator will return
the vehicle to the set target speed.
Pause/Stand By
Cruise control will be disengaged and set to 'Standby' if:
• Lever switch moved to 'Cruise Cancel' position (3 in
figure).
• Brake pedal pressed.
• Auto gear lever moved to P, R or N.
• Manual gear-change made.
• Clutch pedal pressed.
• Conditions initiate SCS intervention.
• An incline causes excessive decline in speed.
Resume
If the cruise control remains on after the disengagement,
moving the lever switch to 'Cruise Resume' (5 in figure)
205
4