MG ZS11, Owner'S Handbook Manual, Page: 233 / 324

STARTING & DRIVING
The conditions for activating the blind spot detection
function include:
1 Rear driver assistance system is in the ON state and
no faults are present in the system.
2 Blind spot detection (BSD) function is enabled.
3 The vehicle speed is above 20mph (30km/h).
4 There are motor vehicles in the blind zone of the
vehicle. The system monitors both the left and right
of the vehicle, the monitored areas are 2m ahead , 7m
behind the rear of the vehicle, and 4.7m from the side
of the vehicle.
Note: The warning lamps will not illuminate whilst
you are overtaking another vehicle and your speed is
greater than that of the vehicle you are passing, even
though it is in the blind zone.
217
4