MG ZS11, Owner'S Handbook Manual, Page: 220 / 324

STARTING & DRIVING
Cruise Control System
O
FF
SET
O
N
R
E
S
U
M
E
C
A
N
C
E
L
• Acceleration (1)
• Deceleration (2)
• Cruise Cancel (3)
• Cruise Standby (4)
• Cruise Resume (5)
• Cruise Set (6)
• ASL Standby (7)
Cruise control enables the driver to maintain a constant
road speed without using the accelerator pedal.
This
is particularly useful for motorway cruising, or for any
journey where a constant speed can be maintained for a
lengthy period.
Cruise Control System Activation
Cruise control system is operated with a lever located, at
the left side of the steering wheel underneath the lighting
stalk switch.
With the START/STOP Switch in position ON/RUNNING,
if the lever switch is in the 'ASL Standby' position (7
in figure), then the cruise control is OFF. To set the
cruise control to 'Standby' pull the lever switch to 'Cruise
Standby' (4 in figure), the yellow indicator lamp
in the
instrument pack will illuminate indicating the system is in
'Cruise Standby' mode.
With the system in 'Standby' when the current vehicle
speed is above 25mph (40km/h), press the 'Cruise Set'
button (6 in figure). The indicator
in the instrument
pack will change to green and the cruise control will enter
and activated state. The operating range is 25 - 125 mph
(40 - 200 km/h).
204