MG ZS11, Owner'S Handbook Manual, Page: 35 / 324

INSTRUMENTS AND CONTROLS
Warning Message Procedure
EPS Performance
Reduced
Indicates that the electric power
steering system has a general
failure and that the steering
performance has been reduced.
As soon as conditions permit,
safely stop the vehicle and switch
off the engine. After a short
while, start the engine, drive
the vehicle a short distance
and monitor the operation of
the steering, if the message is
still displayed or the steering
assistance reduced please
contact an MG Authorised
Repairer immediately.
EPS Assistance
Failure
Indicates that the electric power
steering system has failed. Please
consult an MG Authorised
Repairer immediately.
Warning Message Procedure
Steering Angle Fault
Indicates that the steering angle
sensor has failed. Please consult
an MG Authorised Repairer as
soon as possible.
Steering Angle
Uncalibrated
Indicates that the steering angle
sensor is not calibrated. Please
consult an MG Authorised
Repairer as soon as possible.
ESCL Fault
Indicates that a fault has been
detected with the Electronic
Steering Column Lock (ESCL).
As soon as conditions permit,
safely stop the vehicle and switch
off the engine. Contact an MG
Authorised Repairer as soon as
possible.
Fuel Sensor Fault
Indicates that fuel sensor has
detected a fault. Please consult
an MG Authorised Repairer as
soon as possible.
19
1