MG ZS11, Owner'S Handbook Manual, Page: 138 / 324

SEATS & RESTRAINTS
• Fully extract the seat belt and visibly examine for twists,
fraying, splits or worn areas.
• Fully extract the seat belt and allow to return slowly to
ensure continual and complete smooth operation.
• Visibly examine the seat belt for missing or broken
components.
• Ensure the seat belt warning system is fully functional.
If the seat belt fails any of the above tests or inspections
contact an MG Authorised Repairer immediately for
repairs.
Seat Belts Maintenance
Seat belt repairs should only be carried out
by an MG Authorised Repairer.
Ensure no foreign or sharp objects become
lodged in the seat belt mechanisms.
DO
NOT allow liquids to contaminate the seat
belt buckle, this could affect the buckle
engagement.
Seat belts should only be cleaned with warm soapy water.
Do not use any solvent to clean the seat belt. Do not
attempt to bleach or dye the seat belt, it may weaken the
seat belt. After cleaning, wipe with a cloth and allow to
dry. Do not allow the seat belt to fully retract before it is
completely dry. Keep seat belts clean and dry.
If there are contaminants accumulated in the retractor, the
retraction of the seat belt will be slow. Please use a clean
and dry cloth to remove any contaminants.
Replacing Seat Belts
Collision accidents may damage the seat
belt system. The seat belt system may not
be able to protect users after damage and
may cause serious injury or even death when
an accident occurs. After the accident, seat
belts should be checked immediately and
replaced as necessary.
Seat belts should not require change after minor collisions,
however, some other parts of the seat belt system may
122