MG ZS11, Owner'S Handbook Manual, Page: 231 / 324

STARTING & DRIVING
The rear driver assistance system includes blind spot
detection (BSD), lane change assist (LCA), and rear cross
traffic alert (RCTA) functions.
The rear driver assistance modules are mounted at the
rear of the vehicle on each side, they can assist in detecting
vehicles behind or to the side of your vehicle.
The warning lamps to support this system are located
within the LH and RH door mirror glasses, they will
illuminate or flash to warn of an approaching object or car
to assist you in manoeuvring the car safely.
Note: The radar requires calibration on new vehicles
or for vehicles of where a rear detecting radar
sensor has been replaced. The rear detection radar
sensors possess an automatic calibration function to
compensate for installation error within a certain
range.
When the vehicle is running, the radar will
automatically enter the calibration state. During the
calibration process, the system will provide limited
functions, and the alarm may be inaccurate. Upon
215
4