MI 3309 DeltaGT
Communication
70
8 Communication
The instrument can communicate with the PATLink PRO PC software. The following
actions are supported:
Saved results can be downloaded and stored to a PC.
Custom Auto sequences can be uploaded to the instrument.
There are two communication interfaces available on the instrument: USB or RS232. See
chapter
4.8.9 Communication port
for more information.
How to transfer stored data:
RS232 communication: connect a PC COM port to the instrument PS/2 connector
using the PS/2 - RS232 serial communication cable.
USB communication: connect a PC USB port to the instrument USB connector
using the USB interface cable.
Switch on the PC and the instrument.
Run the PATLink PRO program.
Set communication port and baud rate speed.
The instrument is prepared to upload / download data to the PC.
Note:
USB drivers should be installed on PC before using the USB interface. Refer to
USB installation instructions available on installation CD.
